Relocate the emergency brake cable.
The emergency brake cable runs along the driver's side of the vehicle
between the frame and gas tank. Remove the bracket (yellow arrow) that holds
the cable in place and reposition it upside down.
IMPORTANT: The brake lines are not complete.
There are a few more things you'll need to do to finish them, but because of the
way Fabtech's instructions are we'll need to proceed to the next few steps,
then come back to the brake lines after the lift blocks have been installed
(in five more steps). You can skip ahead to
Step 48 if
you'd like to see what you'll eventually be doing with the brake lines, but
remember to come back here to Step 42 before continuing with the rest of the
lift.
This will lower the emergency brake cable about 4".